Socket

Async, streaming plaintext TCP/IP and secure TLS socket server and client connections for ReactPHP.

The socket library provides re-usable interfaces for a socket-layer server and client based on the EventLoop and Stream components. Its server component allows you to build networking servers that accept incoming connections from networking clients (such as an HTTP server). Its client component allows you to build networking clients that establish outgoing connections to networking servers (such as an HTTP or database client). This library provides async, streaming means for all of this, so you can handle multiple concurrent connections without blocking.

Table of Contents

• Quickstart example
• Connection usage * ConnectionInterface * getRemoteAddress() * getLocalAddress()
• Server usage * ServerInterface * connection event * error event * getAddress() * pause() * resume() * close() * Server * Advanced server usage * TcpServer * SecureServer * UnixServer * LimitingServer * getConnections()
• Client usage * ConnectorInterface * connect() * Connector * Advanced client usage * TcpConnector * DnsConnector * SecureConnector * TimeoutConnector * UnixConnector * FixUriConnector
• Install
• Tests
• License

Quickstart example

Here is a server that closes the connection if you send it anything:

$loop = React\EventLoop\Factory::create();
$socket = new React\Socket\Server('127.0.0.1:8080', $loop);

$socket->on('connection', function (React\Socket\ConnectionInterface $connection) {
    $connection->write("Hello " . $connection->getRemoteAddress() . "!\n");
    $connection->write("Welcome to this amazing server!\n");
    $connection->write("Here's a tip: don't say anything.\n");

    $connection->on('data', function ($data) use ($connection) {
        $connection->close();
    });
});

$loop->run();

See also the examples.

Here's a client that outputs the output of said server and then attempts to send it a string:

$loop = React\EventLoop\Factory::create();
$connector = new React\Socket\Connector($loop);

$connector->connect('127.0.0.1:8080')->then(function (React\Socket\ConnectionInterface $connection) use ($loop) {
    $connection->pipe(new React\Stream\WritableResourceStream(STDOUT, $loop));
    $connection->write("Hello World!\n");
});

$loop->run();

Connection usage

ConnectionInterface

The ConnectionInterface is used to represent any incoming and outgoing connection, such as a normal TCP/IP connection.

An incoming or outgoing connection is a duplex stream (both readable and writable) that implements React's DuplexStreamInterface. It contains additional properties for the local and remote address (client IP) where this connection has been established to/from.

Most commonly, instances implementing this ConnectionInterface are emitted by all classes implementing the ServerInterface and used by all classes implementing the ConnectorInterface.

Because the ConnectionInterface implements the underlying DuplexStreamInterface you can use any of its events and methods as usual:

$connection->on('data', function ($chunk) {
    echo $chunk;
});

$connection->on('end', function () {
    echo 'ended';
});

$connection->on('error', function (Exception $e) {
    echo 'error: ' . $e->getMessage();
});

$connection->on('close', function () {
    echo 'closed';
});

$connection->write($data);
$connection->end($data = null);
$connection->close();
// ?

For more details, see the DuplexStreamInterface.

getRemoteAddress()

The getRemoteAddress(): ?string method returns the full remote address (URI) where this connection has been established with.

$address = $connection->getRemoteAddress();
echo 'Connection with ' . $address . PHP_EOL;

If the remote address can not be determined or is unknown at this time (such as after the connection has been closed), it MAY return a NULL value instead.

Otherwise, it will return the full address (URI) as a string value, such as tcp://127.0.0.1:8080, tcp://[::1]:80, tls://127.0.0.1:443, unix://example.sock or unix:///path/to/example.sock. Note that individual URI components are application specific and depend on the underlying transport protocol.

If this is a TCP/IP based connection and you only want the remote IP, you may use something like this:

$address = $connection->getRemoteAddress();
$ip = trim(parse_url($address, PHP_URL_HOST), '[]');
echo 'Connection with ' . $ip . PHP_EOL;

getLocalAddress()

The getLocalAddress(): ?string method returns the full local address (URI) where this connection has been established with.

$address = $connection->getLocalAddress();
echo 'Connection with ' . $address . PHP_EOL;

If the local address can not be determined or is unknown at this time (such as after the connection has been closed), it MAY return a NULL value instead.

Otherwise, it will return the full address (URI) as a string value, such as tcp://127.0.0.1:8080, tcp://[::1]:80, tls://127.0.0.1:443, unix://example.sock or unix:///path/to/example.sock. Note that individual URI components are application specific and depend on the underlying transport protocol.

This method complements the getRemoteAddress() method, so they should not be confused.

If your TcpServer instance is listening on multiple interfaces (e.g. using the address 0.0.0.0), you can use this method to find out which interface actually accepted this connection (such as a public or local interface).

If your system has multiple interfaces (e.g. a WAN and a LAN interface), you can use this method to find out which interface was actually used for this connection.

Server usage

ServerInterface

The ServerInterface is responsible for providing an interface for accepting incoming streaming connections, such as a normal TCP/IP connection.

Most higher-level components (such as a HTTP server) accept an instance implementing this interface to accept incoming streaming connections. This is usually done via dependency injection, so it's fairly simple to actually swap this implementation against any other implementation of this interface. This means that you SHOULD typehint against this interface instead of a concrete implementation of this interface.

Besides defining a few methods, this interface also implements the EventEmitterInterface which allows you to react to certain events.

connection event

The connection event will be emitted whenever a new connection has been established, i.e. a new client connects to this server socket:

$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    echo 'new connection' . PHP_EOL;
});

See also the ConnectionInterface for more details about handling the incoming connection.

error event

The error event will be emitted whenever there's an error accepting a new connection from a client.

$server->on('error', function (Exception $e) {
    echo 'error: ' . $e->getMessage() . PHP_EOL;
});

Note that this is not a fatal error event, i.e. the server keeps listening for new connections even after this event.

getAddress()

The getAddress(): ?string method can be used to return the full address (URI) this server is currently listening on.

$address = $server->getAddress();
echo 'Server listening on ' . $address . PHP_EOL;

If the address can not be determined or is unknown at this time (such as after the socket has been closed), it MAY return a NULL value instead.

Otherwise, it will return the full address (URI) as a string value, such as tcp://127.0.0.1:8080, tcp://[::1]:80, tls://127.0.0.1:443 unix://example.sock or unix:///path/to/example.sock. Note that individual URI components are application specific and depend on the underlying transport protocol.

If this is a TCP/IP based server and you only want the local port, you may use something like this:

$address = $server->getAddress();
$port = parse_url($address, PHP_URL_PORT);
echo 'Server listening on port ' . $port . PHP_EOL;

pause()

The pause(): void method can be used to pause accepting new incoming connections.

Removes the socket resource from the EventLoop and thus stop accepting new connections. Note that the listening socket stays active and is not closed.

This means that new incoming connections will stay pending in the operating system backlog until its configurable backlog is filled. Once the backlog is filled, the operating system may reject further incoming connections until the backlog is drained again by resuming to accept new connections.

Once the server is paused, no futher connection events SHOULD be emitted.

$server->pause();

$server->on('connection', assertShouldNeverCalled());

This method is advisory-only, though generally not recommended, the server MAY continue emitting connection events.

Unless otherwise noted, a successfully opened server SHOULD NOT start in paused state.

You can continue processing events by calling resume() again.

Note that both methods can be called any number of times, in particular calling pause() more than once SHOULD NOT have any effect. Similarly, calling this after close() is a NO-OP.

resume()

The resume(): void method can be used to resume accepting new incoming connections.

Re-attach the socket resource to the EventLoop after a previous pause().

$server->pause();

$loop->addTimer(1.0, function () use ($server) {
    $server->resume();
});

Note that both methods can be called any number of times, in particular calling resume() without a prior pause() SHOULD NOT have any effect. Similarly, calling this after close() is a NO-OP.

close()

The close(): void method can be used to shut down this listening socket.

This will stop listening for new incoming connections on this socket.

echo 'Shutting down server socket' . PHP_EOL;
$server->close();

Calling this method more than once on the same instance is a NO-OP.

Server

The Server class is the main class in this package that implements the ServerInterface and allows you to accept incoming streaming connections, such as plaintext TCP/IP or secure TLS connection streams. Connections can also be accepted on Unix domain sockets.

$server = new React\Socket\Server(8080, $loop);

As above, the $uri parameter can consist of only a port, in which case the server will default to listening on the localhost address 127.0.0.1, which means it will not be reachable from outside of this system.

In order to use a random port assignment, you can use the port 0:

$server = new React\Socket\Server(0, $loop);
$address = $server->getAddress();

In order to change the host the socket is listening on, you can provide an IP address through the first parameter provided to the constructor, optionally preceded by the tcp:// scheme:

$server = new React\Socket\Server('192.168.0.1:8080', $loop);

If you want to listen on an IPv6 address, you MUST enclose the host in square brackets:

$server = new React\Socket\Server('[::1]:8080', $loop);

To listen on a Unix domain socket (UDS) path, you MUST prefix the URI with the unix:// scheme:

$server = new React\Socket\Server('unix:///tmp/server.sock', $loop);

If the given URI is invalid, does not contain a port, any other scheme or if it contains a hostname, it will throw an InvalidArgumentException:

// throws InvalidArgumentException due to missing port
$server = new React\Socket\Server('127.0.0.1', $loop);

If the given URI appears to be valid, but listening on it fails (such as if port is already in use or port below 1024 may require root access etc.), it will throw a RuntimeException:

$first = new React\Socket\Server(8080, $loop);

// throws RuntimeException because port is already in use
$second = new React\Socket\Server(8080, $loop);

> Note that these error conditions may vary depending on your system and/or configuration. See the exception message and code for more details about the actual error condition.

Optionally, you can specify TCP socket context options for the underlying stream socket resource like this:

$server = new React\Socket\Server('[::1]:8080', $loop, array(
    'tcp' => array(
        'backlog' => 200,
        'so_reuseport' => true,
        'ipv6_v6only' => true
    )
));

> Note that available socket context options, their defaults and effects of changing these may vary depending on your system and/or PHP version. Passing unknown context options has no effect. For BC reasons, you can also pass the TCP socket context options as a simple array without wrapping this in another array under the tcp key.

You can start a secure TLS (formerly known as SSL) server by simply prepending the tls:// URI scheme. Internally, it will wait for plaintext TCP/IP connections and then performs a TLS handshake for each connection. It thus requires valid TLS context options, which in its most basic form may look something like this if you're using a PEM encoded certificate file:

$server = new React\Socket\Server('tls://127.0.0.1:8080', $loop, array(
    'tls' => array(
        'local_cert' => 'server.pem'
    )
));

> Note that the certificate file will not be loaded on instantiation but when an incoming connection initializes its TLS context. This implies that any invalid certificate file paths or contents will only cause an error event at a later time.

If your private key is encrypted with a passphrase, you have to specify it like this:

$server = new React\Socket\Server('tls://127.0.0.1:8000', $loop, array(
    'tls' => array(
        'local_cert' => 'server.pem',
        'passphrase' => 'secret'
    )
));

By default, this server supports TLSv1.0+ and excludes support for legacy SSLv2/SSLv3. As of PHP 5.6+ you can also explicitly choose the TLS version you want to negotiate with the remote side:

$server = new React\Socket\Server('tls://127.0.0.1:8000', $loop, array(
    'tls' => array(
        'local_cert' => 'server.pem',
        'crypto_method' => STREAM_CRYPTO_METHOD_TLSv1_2_SERVER
    )
));

> Note that available TLS context options, their defaults and effects of changing these may vary depending on your system and/or PHP version. The outer context array allows you to also use tcp (and possibly more) context options at the same time. Passing unknown context options has no effect. If you do not use the tls:// scheme, then passing tls context options has no effect.

Whenever a client connects, it will emit a connection event with a connection instance implementing ConnectionInterface:

$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    echo 'Plaintext connection from ' . $connection->getRemoteAddress() . PHP_EOL;
    
    $connection->write('hello there!' . PHP_EOL);
    ?
});

See also the ServerInterface for more details.

> Note that the Server class is a concrete implementation for TCP/IP sockets. If you want to typehint in your higher-level protocol implementation, you SHOULD use the generic ServerInterface instead.

Advanced server usage

TcpServer

The TcpServer class implements the ServerInterface and is responsible for accepting plaintext TCP/IP connections.

$server = new React\Socket\TcpServer(8080, $loop);

As above, the $uri parameter can consist of only a port, in which case the server will default to listening on the localhost address 127.0.0.1, which means it will not be reachable from outside of this system.

In order to use a random port assignment, you can use the port 0:

$server = new React\Socket\TcpServer(0, $loop);
$address = $server->getAddress();

In order to change the host the socket is listening on, you can provide an IP address through the first parameter provided to the constructor, optionally preceded by the tcp:// scheme:

$server = new React\Socket\TcpServer('192.168.0.1:8080', $loop);

If you want to listen on an IPv6 address, you MUST enclose the host in square brackets:

$server = new React\Socket\TcpServer('[::1]:8080', $loop);

If the given URI is invalid, does not contain a port, any other scheme or if it contains a hostname, it will throw an InvalidArgumentException:

// throws InvalidArgumentException due to missing port
$server = new React\Socket\TcpServer('127.0.0.1', $loop);

If the given URI appears to be valid, but listening on it fails (such as if port is already in use or port below 1024 may require root access etc.), it will throw a RuntimeException:

$first = new React\Socket\TcpServer(8080, $loop);

// throws RuntimeException because port is already in use
$second = new React\Socket\TcpServer(8080, $loop);

> Note that these error conditions may vary depending on your system and/or configuration. See the exception message and code for more details about the actual error condition.

Optionally, you can specify socket context options for the underlying stream socket resource like this:

$server = new React\Socket\TcpServer('[::1]:8080', $loop, array(
    'backlog' => 200,
    'so_reuseport' => true,
    'ipv6_v6only' => true
));

> Note that available socket context options, their defaults and effects of changing these may vary depending on your system and/or PHP version. Passing unknown context options has no effect.

Whenever a client connects, it will emit a connection event with a connection instance implementing ConnectionInterface:

$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    echo 'Plaintext connection from ' . $connection->getRemoteAddress() . PHP_EOL;
    
    $connection->write('hello there!' . PHP_EOL);
    ?
});

See also the ServerInterface for more details.

SecureServer

The SecureServer class implements the ServerInterface and is responsible for providing a secure TLS (formerly known as SSL) server.

It does so by wrapping a TcpServer instance which waits for plaintext TCP/IP connections and then performs a TLS handshake for each connection. It thus requires valid TLS context options, which in its most basic form may look something like this if you're using a PEM encoded certificate file:

$server = new React\Socket\TcpServer(8000, $loop);
$server = new React\Socket\SecureServer($server, $loop, array(
    'local_cert' => 'server.pem'
));

> Note that the certificate file will not be loaded on instantiation but when an incoming connection initializes its TLS context. This implies that any invalid certificate file paths or contents will only cause an error event at a later time.

If your private key is encrypted with a passphrase, you have to specify it like this:

$server = new React\Socket\TcpServer(8000, $loop);
$server = new React\Socket\SecureServer($server, $loop, array(
    'local_cert' => 'server.pem',
    'passphrase' => 'secret'
));

By default, this server supports TLSv1.0+ and excludes support for legacy SSLv2/SSLv3. As of PHP 5.6+ you can also explicitly choose the TLS version you want to negotiate with the remote side:

$server = new React\Socket\TcpServer(8000, $loop);
$server = new React\Socket\SecureServer($server, $loop, array(
    'local_cert' => 'server.pem',
    'crypto_method' => STREAM_CRYPTO_METHOD_TLSv1_2_SERVER
));

> Note that available TLS context options, their defaults and effects of changing these may vary depending on your system and/or PHP version. Passing unknown context options has no effect.

Whenever a client completes the TLS handshake, it will emit a connection event with a connection instance implementing ConnectionInterface:

$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    echo 'Secure connection from' . $connection->getRemoteAddress() . PHP_EOL;
    
    $connection->write('hello there!' . PHP_EOL);
    ?
});

Whenever a client fails to perform a successful TLS handshake, it will emit an error event and then close the underlying TCP/IP connection:

$server->on('error', function (Exception $e) {
    echo 'Error' . $e->getMessage() . PHP_EOL;
});

See also the ServerInterface for more details.

Note that the SecureServer class is a concrete implementation for TLS sockets. If you want to typehint in your higher-level protocol implementation, you SHOULD use the generic ServerInterface instead.

> Advanced usage: Despite allowing any ServerInterface as first parameter, you SHOULD pass a TcpServer instance as first parameter, unless you know what you're doing. Internally, the SecureServer has to set the required TLS context options on the underlying stream resources. These resources are not exposed through any of the interfaces defined in this package, but only through the internal Connection class. The TcpServer class is guaranteed to emit connections that implement the ConnectionInterface and uses the internal Connection class in order to expose these underlying resources. If you use a custom ServerInterface and its connection event does not meet this requirement, the SecureServer will emit an error event and then close the underlying connection.

UnixServer

The UnixServer class implements the ServerInterface and is responsible for accepting connections on Unix domain sockets (UDS).

$server = new React\Socket\UnixServer('/tmp/server.sock', $loop);

As above, the $uri parameter can consist of only a socket path or socket path prefixed by the unix:// scheme.

If the given URI appears to be valid, but listening on it fails (such as if the socket is already in use or the file not accessible etc.), it will throw a RuntimeException:

$first = new React\Socket\UnixServer('/tmp/same.sock', $loop);

// throws RuntimeException because socket is already in use
$second = new React\Socket\UnixServer('/tmp/same.sock', $loop);

> Note that these error conditions may vary depending on your system and/or configuration. In particular, Zend PHP does only report "Unknown error" when the UDS path already exists and can not be bound. You may want to check is_file() on the given UDS path to report a more user-friendly error message in this case. See the exception message and code for more details about the actual error condition.

Whenever a client connects, it will emit a connection event with a connection instance implementing ConnectionInterface:

$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    echo 'New connection' . PHP_EOL;

    $connection->write('hello there!' . PHP_EOL);
    ?
});

See also the ServerInterface for more details.

LimitingServer

The LimitingServer decorator wraps a given ServerInterface and is responsible for limiting and keeping track of open connections to this server instance.

Whenever the underlying server emits a connection event, it will check its limits and then either - keep track of this connection by adding it to the list of open connections and then forward the connection event - or reject (close) the connection when its limits are exceeded and will forward an error event instead.

Whenever a connection closes, it will remove this connection from the list of open connections.

$server = new React\Socket\LimitingServer($server, 100);
$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    $connection->write('hello there!' . PHP_EOL);
    ?
});

See also the second example for more details.

You have to pass a maximum number of open connections to ensure the server will automatically reject (close) connections once this limit is exceeded. In this case, it will emit an error event to inform about this and no connection event will be emitted.

$server = new React\Socket\LimitingServer($server, 100);
$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    $connection->write('hello there!' . PHP_EOL);
    ?
});

You MAY pass a null limit in order to put no limit on the number of open connections and keep accepting new connection until you run out of operating system resources (such as open file handles). This may be useful if you do not want to take care of applying a limit but still want to use the getConnections() method.

You can optionally configure the server to pause accepting new connections once the connection limit is reached. In this case, it will pause the underlying server and no longer process any new connections at all, thus also no longer closing any excessive connections. The underlying operating system is responsible for keeping a backlog of pending connections until its limit is reached, at which point it will start rejecting further connections. Once the server is below the connection limit, it will continue consuming connections from the backlog and will process any outstanding data on each connection. This mode may be useful for some protocols that are designed to wait for a response message (such as HTTP), but may be less useful for other protocols that demand immediate responses (such as a "welcome" message in an interactive chat).

$server = new React\Socket\LimitingServer($server, 100, true);
$server->on('connection', function (React\Socket\ConnectionInterface $connection) {
    $connection->write('hello there!' . PHP_EOL);
    ?
});

getConnections()

The getConnections(): ConnectionInterface[] method can be used to return an array with all currently active connections.

foreach ($server->getConnection() as $connection) {
    $connection->write('Hi!');
}

Client usage

ConnectorInterface

The ConnectorInterface is responsible for providing an interface for establishing streaming connections, such as a normal TCP/IP connection.

This is the main interface defined in this package and it is used throughout React's vast ecosystem.

Most higher-level components (such as HTTP, database or other networking service clients) accept an instance implementing this interface to create their TCP/IP connection to the underlying networking service. This is usually done via dependency injection, so it's fairly simple to actually swap this implementation against any other implementation of this interface.

The interface only offers a single method:

connect()

The connect(string $uri): PromiseInterface<ConnectionInterface,Exception> method can be used to create a streaming connection to the given remote address.

It returns a Promise which either fulfills with a stream implementing ConnectionInterface on success or rejects with an Exception if the connection is not successful:

$connector->connect('google.com:443')->then(
    function (React\Socket\ConnectionInterface $connection) {
        // connection successfully established
    },
    function (Exception $error) {
        // failed to connect due to $error
    }
);

See also ConnectionInterface for more details.

The returned Promise MUST be implemented in such a way that it can be cancelled when it is still pending. Cancelling a pending promise MUST reject its value with an Exception. It SHOULD clean up any underlying resources and references as applicable:

$promise = $connector->connect($uri);

$promise->cancel();

Connector

The Connector class is the main class in this package that implements the ConnectorInterface and allows you to create streaming connections.

You can use this connector to create any kind of streaming connections, such as plaintext TCP/IP, secure TLS or local Unix connection streams.

It binds to the main event loop and can be used like this:

$loop = React\EventLoop\Factory::create();
$connector = new React\Socket\Connector($loop);

$connector->connect($uri)->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

$loop->run();

In order to create a plaintext TCP/IP connection, you can simply pass a host and port combination like this:

$connector->connect('www.google.com:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

> If you do no specify a URI scheme in the destination URI, it will assume tcp:// as a default and establish a plaintext TCP/IP connection. Note that TCP/IP connections require a host and port part in the destination URI like above, all other URI components are optional.

In order to create a secure TLS connection, you can use the tls:// URI scheme like this:

$connector->connect('tls://www.google.com:443')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

In order to create a local Unix domain socket connection, you can use the unix:// URI scheme like this:

$connector->connect('unix:///tmp/demo.sock')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

> The getRemoteAddress() method will return the target Unix domain socket (UDS) path as given to the connect() method, including the unix:// scheme, for example unix:///tmp/demo.sock. The getLocalAddress() method will most likely return a null value as this value is not applicable to UDS connections here.

Under the hood, the Connector is implemented as a higher-level facade for the lower-level connectors implemented in this package. This means it also shares all of their features and implementation details. If you want to typehint in your higher-level protocol implementation, you SHOULD use the generic ConnectorInterface instead.

The Connector class will try to detect your system DNS settings (and uses Google's public DNS server 8.8.8.8 as a fallback if unable to determine your system settings) to resolve all public hostnames into underlying IP addresses by default. If you explicitly want to use a custom DNS server (such as a local DNS relay or a company wide DNS server), you can set up the Connector like this:

$connector = new React\Socket\Connector($loop, array(
    'dns' => '127.0.1.1'
));

$connector->connect('localhost:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

If you do not want to use a DNS resolver at all and want to connect to IP addresses only, you can also set up your Connector like this:

$connector = new React\Socket\Connector($loop, array(
    'dns' => false
));

$connector->connect('127.0.0.1:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

Advanced: If you need a custom DNS Resolver instance, you can also set up your Connector like this:

$dnsResolverFactory = new React\Dns\Resolver\Factory();
$resolver = $dnsResolverFactory->createCached('127.0.1.1', $loop);

$connector = new React\Socket\Connector($loop, array(
    'dns' => $resolver
));

$connector->connect('localhost:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

By default, the tcp:// and tls:// URI schemes will use timeout value that repects your default_socket_timeout ini setting (which defaults to 60s). If you want a custom timeout value, you can simply pass this like this:

$connector = new React\Socket\Connector($loop, array(
    'timeout' => 10.0
));

Similarly, if you do not want to apply a timeout at all and let the operating system handle this, you can pass a boolean flag like this:

$connector = new React\Socket\Connector($loop, array(
    'timeout' => false
));

By default, the Connector supports the tcp://, tls:// and unix:// URI schemes. If you want to explicitly prohibit any of these, you can simply pass boolean flags like this:

// only allow secure TLS connections
$connector = new React\Socket\Connector($loop, array(
    'tcp' => false,
    'tls' => true,
    'unix' => false,
));

$connector->connect('tls://google.com:443')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

The tcp:// and tls:// also accept additional context options passed to the underlying connectors. If you want to explicitly pass additional context options, you can simply pass arrays of context options like this:

// allow insecure TLS connections
$connector = new React\Socket\Connector($loop, array(
    'tcp' => array(
        'bindto' => '192.168.0.1:0'
    ),
    'tls' => array(
        'verify_peer' => false,
        'verify_peer_name' => false
    ),
));

$connector->connect('tls://localhost:443')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

By default, this connector supports TLSv1.0+ and excludes support for legacy SSLv2/SSLv3. As of PHP 5.6+ you can also explicitly choose the TLS version you want to negotiate with the remote side:

$connector = new React\Socket\Connector($loop, array(
    'tls' => array(
        'crypto_method' => STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT
    )
));

> For more details about context options, please refer to the PHP documentation about socket context options and SSL context options.

Advanced: By default, the Connector supports the tcp://, tls:// and unix:// URI schemes. For this, it sets up the required connector classes automatically. If you want to explicitly pass custom connectors for any of these, you can simply pass an instance implementing the ConnectorInterface like this:

$dnsResolverFactory = new React\Dns\Resolver\Factory();
$resolver = $dnsResolverFactory->createCached('127.0.1.1', $loop);
$tcp = new React\Socket\DnsConnector(new React\Socket\TcpConnector($loop), $resolver);

$tls = new React\Socket\SecureConnector($tcp, $loop);

$unix = new React\Socket\UnixConnector($loop);

$connector = new React\Socket\Connector($loop, array(
    'tcp' => $tcp,
    'tls' => $tls,
    'unix' => $unix,

    'dns' => false,
    'timeout' => false,
));

$connector->connect('google.com:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

> Internally, the tcp:// connector will always be wrapped by the DNS resolver, unless you disable DNS like in the above example. In this case, the tcp:// connector receives the actual hostname instead of only the resolved IP address and is thus responsible for performing the lookup. Internally, the automatically created tls:// connector will always wrap the underlying tcp:// connector for establishing the underlying plaintext TCP/IP connection before enabling secure TLS mode. If you want to use a custom underlying tcp:// connector for secure TLS connections only, you may explicitly pass a tls:// connector like above instead. Internally, the tcp:// and tls:// connectors will always be wrapped by TimeoutConnector, unless you disable timeouts like in the above example.

Advanced client usage

TcpConnector

The TcpConnector class implements the ConnectorInterface and allows you to create plaintext TCP/IP connections to any IP-port-combination:

$tcpConnector = new React\Socket\TcpConnector($loop);

$tcpConnector->connect('127.0.0.1:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

$loop->run();

See also the examples.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $tcpConnector->connect('127.0.0.1:80');

$promise->cancel();

Calling cancel() on a pending promise will close the underlying socket resource, thus cancelling the pending TCP/IP connection, and reject the resulting promise.

You can optionally pass additional socket context options to the constructor like this:

$tcpConnector = new React\Socket\TcpConnector($loop, array(
    'bindto' => '192.168.0.1:0'
));

Note that this class only allows you to connect to IP-port-combinations. If the given URI is invalid, does not contain a valid IP address and port or contains any other scheme, it will reject with an InvalidArgumentException:

If the given URI appears to be valid, but connecting to it fails (such as if the remote host rejects the connection etc.), it will reject with a RuntimeException.

If you want to connect to hostname-port-combinations, see also the following chapter.

> Advanced usage: Internally, the TcpConnector allocates an empty context resource for each stream resource. If the destination URI contains a hostname query parameter, its value will be used to set up the TLS peer name. This is used by the SecureConnector and DnsConnector to verify the peer name and can also be used if you want a custom TLS peer name.

DnsConnector

The DnsConnector class implements the ConnectorInterface and allows you to create plaintext TCP/IP connections to any hostname-port-combination.

It does so by decorating a given TcpConnector instance so that it first looks up the given domain name via DNS (if applicable) and then establishes the underlying TCP/IP connection to the resolved target IP address.

Make sure to set up your DNS resolver and underlying TCP connector like this:

$dnsResolverFactory = new React\Dns\Resolver\Factory();
$dns = $dnsResolverFactory->createCached('8.8.8.8', $loop);

$dnsConnector = new React\Socket\DnsConnector($tcpConnector, $dns);

$dnsConnector->connect('www.google.com:80')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

$loop->run();

See also the examples.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $dnsConnector->connect('www.google.com:80');

$promise->cancel();

Calling cancel() on a pending promise will cancel the underlying DNS lookup and/or the underlying TCP/IP connection and reject the resulting promise.

> Advanced usage: Internally, the DnsConnector relies on a Resolver to look up the IP address for the given hostname. It will then replace the hostname in the destination URI with this IP and append a hostname query parameter and pass this updated URI to the underlying connector. The underlying connector is thus responsible for creating a connection to the target IP address, while this query parameter can be used to check the original hostname and is used by the TcpConnector to set up the TLS peer name. If a hostname is given explicitly, this query parameter will not be modified, which can be useful if you want a custom TLS peer name.

SecureConnector

The SecureConnector class implements the ConnectorInterface and allows you to create secure TLS (formerly known as SSL) connections to any hostname-port-combination.

It does so by decorating a given DnsConnector instance so that it first creates a plaintext TCP/IP connection and then enables TLS encryption on this stream.

$secureConnector = new React\Socket\SecureConnector($dnsConnector, $loop);

$secureConnector->connect('www.google.com:443')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write("GET / HTTP/1.0\r\nHost: www.google.com\r\n\r\n");
    ...
});

$loop->run();

See also the examples.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $secureConnector->connect('www.google.com:443');

$promise->cancel();

Calling cancel() on a pending promise will cancel the underlying TCP/IP connection and/or the SSL/TLS negotiation and reject the resulting promise.

You can optionally pass additional SSL context options to the constructor like this:

$secureConnector = new React\Socket\SecureConnector($dnsConnector, $loop, array(
    'verify_peer' => false,
    'verify_peer_name' => false
));

By default, this connector supports TLSv1.0+ and excludes support for legacy SSLv2/SSLv3. As of PHP 5.6+ you can also explicitly choose the TLS version you want to negotiate with the remote side:

$secureConnector = new React\Socket\SecureConnector($dnsConnector, $loop, array(
    'crypto_method' => STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT
));

> Advanced usage: Internally, the SecureConnector relies on setting up the required context options on the underlying stream resource. It should therefor be used with a TcpConnector somewhere in the connector stack so that it can allocate an empty context resource for each stream resource and verify the peer name. Failing to do so may result in a TLS peer name mismatch error or some hard to trace race conditions, because all stream resources will use a single, shared default context resource otherwise.

TimeoutConnector

The TimeoutConnector class implements the ConnectorInterface and allows you to add timeout handling to any existing connector instance.

It does so by decorating any given ConnectorInterface instance and starting a timer that will automatically reject and abort any underlying connection attempt if it takes too long.

$timeoutConnector = new React\Socket\TimeoutConnector($connector, 3.0, $loop);

$timeoutConnector->connect('google.com:80')->then(function (React\Socket\ConnectionInterface $connection) {
    // connection succeeded within 3.0 seconds
});

See also any of the examples.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $timeoutConnector->connect('google.com:80');

$promise->cancel();

Calling cancel() on a pending promise will cancel the underlying connection attempt, abort the timer and reject the resulting promise.

UnixConnector

The UnixConnector class implements the ConnectorInterface and allows you to connect to Unix domain socket (UDS) paths like this:

$connector = new React\Socket\UnixConnector($loop);

$connector->connect('/tmp/demo.sock')->then(function (React\Socket\ConnectionInterface $connection) {
    $connection->write("HELLO\n");
});

$loop->run();

Connecting to Unix domain sockets is an atomic operation, i.e. its promise will settle (either resolve or reject) immediately. As such, calling cancel() on the resulting promise has no effect.

> The getRemoteAddress() method will return the target Unix domain socket (UDS) path as given to the connect() method, prepended with the unix:// scheme, for example unix:///tmp/demo.sock. The getLocalAddress() method will most likely return a null value as this value is not applicable to UDS connections here.

FixedUriConnector

The FixedUriConnector class implements the ConnectorInterface and decorates an existing Connector to always use a fixed, preconfigured URI.

This can be useful for consumers that do not support certain URIs, such as when you want to explicitly connect to a Unix domain socket (UDS) path instead of connecting to a default address assumed by an higher-level API:

$connector = new React\Socket\FixedUriConnector(
    'unix:///var/run/docker.sock',
    new React\Socket\UnixConnector($loop)
);

// destination will be ignored, actually connects to Unix domain socket
$promise = $connector->connect('localhost:80');

Install

The recommended way to install this library is through Composer. New to Composer?

This project follows SemVer. This will install the latest supported version:

$ composer require react/socket:^1.3

See also the CHANGELOG for details about version upgrades.

This project aims to run on any platform and thus does not require any PHP extensions and supports running on legacy PHP 5.3 through current PHP 7+ and HHVM. It's highly recommended to use PHP 7+ for this project, partly due to its vast performance improvements and partly because legacy PHP versions require several workarounds as described below.

Secure TLS connections received some major upgrades starting with PHP 5.6, with the defaults now being more secure, while older versions required explicit context options. This library does not take responsibility over these context options, so it's up to consumers of this library to take care of setting appropriate context options as described above.

PHP < 7.3.3 (and PHP < 7.2.15) suffers from a bug where feof() might block with 100% CPU usage on fragmented TLS records. We try to work around this by always consuming the complete receive buffer at once to avoid stale data in TLS buffers. This is known to work around high CPU usage for well-behaving peers, but this may cause very large data chunks for high throughput scenarios. The buggy behavior can still be triggered due to network I/O buffers or malicious peers on affected versions, upgrading is highly recommended.

PHP < 7.1.4 (and PHP < 7.0.18) suffers from a bug when writing big chunks of data over TLS streams at once. We try to work around this by limiting the write chunk size to 8192 bytes for older PHP versions only. This is only a work-around and has a noticable performance penalty on affected versions.

This project also supports running on HHVM. Note that really old HHVM < 3.8 does not support secure TLS connections, as it lacks the required stream_socket_enable_crypto() function. As such, trying to create a secure TLS connections on affected versions will return a rejected promise instead. This issue is also covered by our test suite, which will skip related tests on affected versions.

Tests

To run the test suite, you first need to clone this repo and then install all dependencies through Composer:

$ composer install

To run the test suite, go to the project root and run:

$ php vendor/bin/phpunit

The test suite also contains a number of functional integration tests that rely on a stable internet connection. If you do not want to run these, they can simply be skipped like this:

$ php vendor/bin/phpunit --exclude-group internet

License

MIT, see LICENSE file.