/*
* see COPYRIGHT
*/
/* glyph entry, one drawing command */
typedef struct gentry {
/* this list links all GENTRYs of a GLYPH sequentially */
struct gentry *next; /* double linked list */
struct gentry *prev;
/* this list links all GENTRYs of one contour -
* of types GE_LINE and GE_CURVE only
* bkwd is also reused: in the very first entry (normally
* of type GE_MOVE) it points to g->entries
*/
struct gentry *cntr[2]; /* double-linked circular list */
/* convenience handles */
#define bkwd cntr[0]
#define frwd cntr[1]
/* various extended structures used at some stage of transformation */
void *ext;
union {
struct {
int val[2][3]; /* integer values */
} i;
struct {
double val[2][3]; /* floating values */
} f;
} points; /* absolute values, NOT deltas */
/* convenience handles */
#define ipoints points.i.val
#define fpoints points.f.val
#define ixn ipoints[0]
#define iyn ipoints[1]
#define fxn fpoints[0]
#define fyn fpoints[1]
#define ix1 ixn[0]
#define ix2 ixn[1]
#define ix3 ixn[2]
#define iy1 iyn[0]
#define iy2 iyn[1]
#define iy3 iyn[2]
#define fx1 fxn[0]
#define fx2 fxn[1]
#define fx3 fxn[2]
#define fy1 fyn[0]
#define fy2 fyn[1]
#define fy3 fyn[2]
char flags;
#define GEF_FLOAT 0x02 /* entry contains floating point data */
#define GEF_LINE 0x04 /* entry looks like a line even if it's a curve */
unsigned char dir; /* used to temporarily store the values for
* the directions of the ends of curves */
/* front end */
#define CVDIR_FUP 0x02 /* goes over the line connecting the ends */
#define CVDIR_FEQUAL 0x01 /* coincides with the line connecting the
* ends */
#define CVDIR_FDOWN 0x00 /* goes under the line connecting the ends */
#define CVDIR_FRONT 0x0F /* mask of all front directions */
/* rear end */
#define CVDIR_RSAME 0x30 /* is the same as for the front end */
#define CVDIR_RUP 0x20 /* goes over the line connecting the ends */
#define CVDIR_REQUAL 0x10 /* coincides with the line connecting the
* ends */
#define CVDIR_RDOWN 0x00 /* goes under the line connecting the ends */
#define CVDIR_REAR 0xF0 /* mask of all rear directions */
signed char stemid; /* connection to the substituted stem group */
char type;
#define GE_HSBW 'B'
#define GE_MOVE 'M'
#define GE_LINE 'L'
#define GE_CURVE 'C'
#define GE_PATH 'P'
/* indexes of the points to be used for calculation of the tangents */
signed char ftg; /* front tangent */
signed char rtg; /* rear tangent, -1 means "idx 2 of the previous entry" */
} GENTRY;
/* stem structure, describes one [hv]stem */
/* acually, it describes one border of a stem */
/* the whole stem is a pair of these structures */
typedef struct stem {
short value; /* value of X or Y coordinate */
short origin; /* point of origin for curve stems */
GENTRY *ge; /* entry that has (value, origin) as its first dot */
/* also for all the stems the couple (value, origin)
* is used to determine whether a stem is relevant for a
* line, it's considered revelant if this tuple is
* equal to any of the ends of the line.
* ge is also used to resolve ambiguity if there is more than
* one line going through certain pointi, it is used to
* distinguish these lines.
*/
short from, to; /* values of other coordinate between
* which this stem is valid */
short flags;
/* ordering of ST_END, ST_FLAT, ST_ZONE is IMPORTANT for sorting */
#define ST_END 0x01 /* end of line, lowest priority */
#define ST_FLAT 0x02 /* stem is defined by a flat line, not a
* curve */
#define ST_ZONE 0x04 /* pseudo-stem, the limit of a blue zone */
#define ST_UP 0x08 /* the black area is to up or right from
* value */
#define ST_3 0x20 /* first stem of [hv]stem3 */
#define ST_BLUE 0x40 /* stem is in blue zone */
#define ST_TOPZONE 0x80 /* 1 - top zone, 0 - bottom zone */
#define ST_VERT 0x100 /* vertical stem (used in substitutions) */
} STEM;
#define MAX_STEMS 2000 /* we can't have more stems than path
* elements (or hope so) */
#define NSTEMGRP 50 /* maximal number of the substituted stem groups */
/* structure for economical representation of the
* substituted stems
*/
typedef struct stembounds {
short low; /* low bound */
short high; /* high bound */
char isvert; /* 1 - vertical, 0 - horizontal */
char already; /* temp. flag: is aleready included */
} STEMBOUNDS;
struct kern {
unsigned id; /* ID of the second glyph */
int val; /* kerning value */
};
typedef struct contour {
short ymin, xofmin;
short inside; /* inside which contour */
char direction;
#define DIR_OUTER 1
#define DIR_INNER 0
} CONTOUR;
/* becnjcarson: allow glyphs to have multiple character codes. This isn't 100%
perfect, but should be enough for most normal fonts. */
#define GLYPH_MAX_ENCODINGS (4)
typedef struct glyph {
int char_no;/* Encoding of glyph */
int orig_code[GLYPH_MAX_ENCODINGS]; /* code(s) of glyph in the font's original encoding */
char *name; /* Postscript name of glyph */
int xMin, yMin, xMax, yMax; /* values from TTF dictionary */
int lsb; /* left sidebearing */
int ttf_pathlen; /* total length of TTF paths */
short width;
short flags;
#define GF_USED 0x0001 /* whether is this glyph used in T1 font */
#define GF_FLOAT 0x0002 /* thys glyph contains floating point entries */
GENTRY *entries;/* doube linked list of entries */
GENTRY *lastentry; /* the last inserted entry */
GENTRY *path; /* beggining of the last path */
int oldwidth; /* actually also scaled */
int scaledwidth;
#define MAXLEGALWIDTH 10000
struct kern *kern; /* kerning data */
int kerncount; /* number of kerning pairs */
int kernalloc; /* for how many pairs we have space */
STEM *hstems; /* global horiz. and vert. stems */
STEM *vstems;
int nhs, nvs; /* numbers of stems */
STEMBOUNDS *sbstems; /* substituted stems for all the groups */
short *nsbs; /* indexes of the group ends in the common array */
int nsg; /* actual number of the stem groups */
int firstsubr; /* first substistuted stems subroutine number */
CONTOUR *contours; /* it is not used now */
int ncontours;
int rymin, rymax; /* real values */
/* do we have flat surfaces on top/bottom */
char flatymin, flatymax;
} GLYPH;
/* description of a dot for calculation of its distance to a curve */
struct dot_dist {
double p[2 /*X,Y*/]; /* coordinates of a dot */
double dist2; /* squared distance from the dot to the curve */
short seg; /* the closest segment of the curve */
};
extern int stdhw, stdvw; /* dominant stems widths */
extern int stemsnaph[12], stemsnapv[12]; /* most typical stem width */
extern int bluevalues[14];
extern int nblues;
extern int otherblues[10];
extern int notherb;
extern int bbox[4]; /* the FontBBox array */
extern double italic_angle;
extern GLYPH *glyph_list;
extern int encoding[]; /* inverse of glyph[].char_no */
/* prototypes of functions */
void rmoveto( int dx, int dy);
void rlineto( int dx, int dy);
void rrcurveto( int dx1, int dy1, int dx2, int dy2, int dx3, int dy3);
void assertpath( GENTRY * from, char *file, int line, char *name);
void fg_rmoveto( GLYPH * g, double x, double y);
void ig_rmoveto( GLYPH * g, int x, int y);
void fg_rlineto( GLYPH * g, double x, double y);
void ig_rlineto( GLYPH * g, int x, int y);
void fg_rrcurveto( GLYPH * g, double x1, double y1,
double x2, double y2, double x3, double y3);
void ig_rrcurveto( GLYPH * g, int x1, int y1,
int x2, int y2, int x3, int y3);
void g_closepath( GLYPH * g);
void pathtoint( GLYPH *g);
void ffixquadrants( GLYPH *g);
void flattencurves( GLYPH * g);
int checkcv( GENTRY * ge, int dx, int dy);
void iclosepaths( GLYPH * g);
void fclosepaths( GLYPH * g);
void smoothjoints( GLYPH * g);
void buildstems( GLYPH * g);
void fstraighten( GLYPH * g);
void istraighten( GLYPH * g, int zigonly);
void isplitzigzags( GLYPH * g);
void fsplitzigzags( GLYPH * g);
void fforceconcise( GLYPH * g);
void iforceconcise( GLYPH * g);
void reversepathsfromto( GENTRY * from, GENTRY * to);
void reversepaths( GLYPH * g);
void dumppaths( GLYPH * g, GENTRY *start, GENTRY *end);
void print_glyph( int glyphno);
int print_glyph_subs( int glyphno, int startid);
void print_glyph_metrics( FILE *afm_file, int code, int glyphno);
void print_glyph_metrics_ufm( FILE *ufm_file, int code, int glyphno);
void findblues(void);
void stemstatistics(void);
void docorrectwidth(void);
void addkernpair( unsigned id1, unsigned id2, int unscval);
void print_kerning( FILE *afm_file);
int fcrossrayscv( double curve[4][2], double *max1, double *max2);
int fcrossraysge( GENTRY *ge1, GENTRY *ge2, double *max1, double *max2,
double crossdot[2][2]);
double fdotsegdist2( double seg[2][2], double dot[2]);
double fdotcurvdist2( double curve[4][2], struct dot_dist *dots, int ndots, double *maxp);
void fapproxcurve( double cv[4][2], struct dot_dist *dots, int ndots);
|