By ASCOOS CMS

ascoos.com

<email contact>

---

How to use Block article_author_more of Ascoos Cms.

This tutorial is divided into three steps.

1. Installing the article_author_more Block
2. Editing and configuration of its parameters.
3. The result we have.

---

Installation

The first step is to install the Block on the Ascoos Cms website we have.

Block is installed only through the built-in installer in the admin section.

From the Ascoos Cms desktop, double-click the Installation Program icon you see in the image below.

This will open us the installer, in which we will have to follow some easy steps to complete the installation of our block.

Welcome

First the program welcomes us to the installer, giving us some information about it and the installation process.

Action Selection

Here we select the two action steps of the installer.

• In the first step, we select the action Install, thus declaring to the installer that we will do a new installation. In case our block is already installed and we just want to upgrade it then we will choose Extension Upgrade. In case we want to uninstall a component then we will select Unistall. The first option `ASCOOS Upgrade' is for kernel version upgrade.

• In the second action step, we choose the type of our extension. In our case here, we choose Blocks.

Then press the Next button to continue with the installation process.

Select installation package

Here we are asked to select from our computer the compressed zip file containing the installation package.

The program also informs us that the installation package should be certified by AlexSoft Software to have all the necessary security safeguards for your system.

We press Next and since in this particular case we have no parameters that must be set during the installation process, the program will complete the installation.

We will press the Close button at the end and we will finish our work with the installer.

Edit and configure the Block

On the Ascoos Cms desktop, double-click the ASCOOS Explorer icon to open the Ascoos component management program.

In the program that will open (see image below) we choose:

1. From the menu ribbon the Blocks tab to go to the Blocks management page.

2. we go to the Views section and from the drop-down named Block we select article_author_more. This will show us in the list of blocks only the block with the title More Author Articles.

3. In the displayed list, click on More Author Articles to open our block for editing.

---

1. Edit the basic properties of the Block.

All Blocks in Ascoos Cms have their basic settings the same from the start.

From the editing page of the basic settings, we can adjust to the specific needs of each block, although the install.php file of our block's installation package takes care of presetting these specifics, as you can see in the image below.

let's analyze these pieces of basic settings one by one.

1. BLOCK NAME: Here we give the name our block will have. In addition to letters and numbers, we can also use the hyphen - and underscore hyphen _.
   • Block Name : it is essentially the name of the copy of the physical block.
   • Natural Block Name : It is the natural name of the block as it is on the server disk. We can create as many copies of the block as we want. Of course, each one will have a different name.

2. BLOCK TITLE : Here we can give multilingual titles to our block. Of course we can only in the languages supported by our website. We can add, remove and sort the titles as we wish.

3. VIEW OPTIONS : Here we define the display parameters of the block.

   • Envirenment : The environment that will be displayed. e.g. in the image below, we tell it to appear in the foreground of the webpage. It could be set to appear in the admin section, newsletter, etc.

   • 3LT Template (Front) : Each Ascoos Template consists of 3 layers, front, frontpage and efp (encapsulation frontpage).front is the main part of the template and does not change. Within this the two other layers listed below can appear, but only a frontpage. While we can embed multiple efp. With the technology of 3LT Template, `Ascoos Cms', gives the possibility to adjust from page to page, from article to article, etc., without changing our basic visual part.

   • 3LT Template (Frontpage): The 2nd level of our template. It can contain individual code (like native blocks), contain as many efps as we want but cannot contain another frontpage or front.

   • 3LT Template (EFP) : The 3rd level of the template. can be integrated into the previous two as many times as we like. CAUTION - BONUS : The combination of the three layers can give enormous flexibility in the appearance of our components. E.g. we create two copies of the block with different settings and parameters and while the display position is the same, if the frontpage is different, we will have only one block displayed, while the other block will appear on the frontpage we set for it, when the page contains this the frontpage. E.g. in the program articles we define another frontpage and in the program contacts another, but both have display positions, e.g. the "position1". Depending on which frontpage or efp we define in our block settings, the corresponding one will appear.

   • View Position : The display position of the block. Each part of 3LT Templates can have different display positions. These are usually created during the template installation process, but can be created later as well.

   • View Order : The order that will appear inside the View Position.

4. BLOCK PROPERTIES :

   • A/A : Auto Increment number. Generated from the database.

   • User Group : We declare the minimum user group access level.

   • Published : Should the block be published?

   • Show Title : Will the title of the block be displayed?

   • Cache : Include the final code of the block in the cache?

   • Cache Duration : Refresh rate of the data in the Cache, in seconds.

5. COMMENTS ON BLOCK : includes various comments the user wants to have about the block.

---

2. Permissions

How access rights work, not only for blocks but also for all components of Ascoos Cms is described in the video Ascoos Cms Blocks - Edit Permissions which is on youtube.

---

3. Edit Block's special parameters.

Each component of Ascoos Cms also has its own operating parameters. For the specific block are those shown in the following image.

1. General Configuration Options:

   • Number of articles : Here you must select the number of articles that will appear.

   • Showing regardless of language : Want to include all articles, independent from the language that was drawn up? This will result to display all articles regardless of language syntax. For more information, on the left, will display a flag to specify the language syntax.

   • Appearance of Projections : Want to presented the column with the total projections of content?

   • Theme of appearance of Block : Select the theme that will be implemented block. Each block has at least a predetermined theme, called «Default».

2. Choices of Categories :

   • Types of Articles : What types of articles you want included? This will result in the appearance only of the articles are as a type of defined.

   • Categories that will be included : Which categories do you want to include? This will result in only the articles have one of these categories appear in the list of author articles.

   • Categories to be excluded : Which categories you want to exclude? This will lead to sidestep all the articles belong to these categories. This choice reverses the category from the above parameter (included categories), if it is also given in this.

---

The result

At the end we select the Save button from the ribbon menu and go to the frontend of our page to see the results.

As an Administrator we have the ability to see our website fully functional, even if its elements are reserved for publication at a later time.

From the settings we see in the various images above, we will have a result on our page like the one below.

By selecting the default theme :

By selecting the cleargray theme :

If we select an article that does not exist in the current language of the page, then an error message appears, prompting us to select the article in another language: